Call Forwarding Parameters

The call forwarding parameters are described in the table below.

Parameter

Description

'Enable Call Forward'

configure voip > gateway dtmf-supp-service supp-service-settings > call-forward

[EnableForward]

Enables call forwarding.

■

[0] Check box cleared o = Disabled.

■

[1] Check box selected þ = (Default) Enabled.

Note:

■

To use this service, the devices at both ends must support call forwarding.

■

For the device to respond to SIP 3xx responses with a new SIP request (forwarding the original request), enable the parameter.